One More Lawn System Requirements: Can Your PC Run It?

The official One More Lawn PC requirements, what they mean in practice, and the upgrades that matter if you are below the minimum or chasing 60 FPS.

Last Updated: 2026-11-11

One More Lawn is not a hardware monster. The official minimum is an older quad-core and a GTX 960, and the recommended build targets 1080p at 60 FPS on high. That does not mean every PC will run it well. The game simulates a lot of grass, and a weak CPU can bottleneck the mower even when the GPU is fine. This page breaks down the official specs and what they mean in practice.

Check the CPU before the GPU

The grass simulation is CPU-heavy. A newer six-core CPU helps more than a GPU upgrade in this game.

The official requirements

Component	Minimum	Recommended
OS	Windows 10 64-bit	Windows 10/11 64-bit
CPU	Intel Core i5-4460 / AMD Ryzen 3 1200	Intel Core i5-8400 / AMD Ryzen 5 2600
RAM	8 GB	16 GB
GPU	NVIDIA GTX 960 / AMD RX 460, 2 GB	NVIDIA GTX 1060 6 GB / AMD RX 580
DirectX	11	11
Network	Broadband	Broadband
Storage	2 GB	2 GB
Target	1080p low / 720p medium	1080p 60 FPS high

The storage figure is small. The game is not shipping with 4K textures or a massive audio library. That is consistent with the art style.

What the minimum actually means

The minimum is a playable target, not a promise of 60 FPS. At 1080p low, the GTX 960 and RX 460 are doing real work. Expect:

30–60 FPS depending on the lawn.
Dips when a lot of grass is being cut at once.
Longer load times on a mechanical hard drive.
Acceptable visuals, but not the full effect.

If you are on a laptop with an integrated GPU, you are below the minimum. The game may launch, but the experience will be poor.

What the recommended build gets you

The recommended build targets 1080p at 60 FPS on high. The i5-8400 and Ryzen 5 2600 are six-core CPUs, which helps with the grass simulation and the co-op networking. The GTX 1060 6 GB and RX 580 are 1080p cards.

At this level, you should expect:

A stable 60 FPS in single-player.
Some dips in six-player co-op with a lot of effects.
Fast load times on an SSD.
Room to raise settings above high on a newer GPU.

CPU versus GPU

The grass is the unusual part. Every blade that bends is a small simulation cost. That cost lands on the CPU as much as the GPU.

Signs of a CPU bottleneck:

The GPU is not at 100% but the frame rate is low.
The game stutters when many blades are cut.
Co-op is worse than solo.
Lowering resolution does not help much.

Signs of a GPU bottleneck:

The GPU is at 100%.
Lowering resolution raises the frame rate.
The game looks blurry at low settings but runs better.

If you have to upgrade one part, a modern six-core CPU is the safer bet for this game. A GPU upgrade helps too, but the simulation is the differentiator.

Laptop considerations

Laptop CPUs with the same name as desktop parts are often slower. A laptop RTX 3060 is not a desktop RTX 3060. Check the wattage and the cooling.

For a laptop:

Plug in the charger. Battery mode may throttle the GPU.
Set the Windows power plan to performance.
Make sure the game uses the discrete GPU, not the integrated one.
Keep the vents clear.

If the laptop has only integrated graphics, do not buy the game expecting a miracle. The low FPS guide→ has settings that help, but they cannot add hardware.

Steam Deck and handhelds

Valve has not confirmed Steam Deck verification for One More Lawn. The game is a Windows title with controller support, and the recommended GPU is above the Deck's class. It may run, but do not assume a verified experience.

If you try it:

Use Proton.
Start at low settings.
Cap the frame rate to 30 or 40.
Expect the fan to work.

A handheld is a compromise, not the target platform.

Storage and load times

The 2 GB storage requirement is tiny. The load time is mostly about the drive:

NVMe SSD: fastest.
SATA SSD: fast.
Mechanical HDD: noticeably slower, especially on the first load.

If the game stutters when you drive into a new section, the drive may be the cause. Move the install to an SSD.

Network requirements

The game lists broadband because of online co-op. Single-player does not need a connection after installation, assuming Steam's offline mode works.

For co-op, the host's upload is the limit. A fast download does not make you a good host. If six players lag, the host's connection is the first suspect.